MIDI implementation details for the Studio Electronics ATC-1
Contributions welcome! You can email us your edited CSV if you don't want to use GitHub.
| Parameter | CC | Range | Usage | Orientation |
|---|---|---|---|---|
| OSC1 Freq | 54 | [0–127] | — | 0-based |
| OSC1 TRI ON | 55 | [0–127] | — | 0-based |
| OSC1 SAW ON | 56 | [0–127] | — | 0-based |
| OSC1 PUL ON | 57 | [0–127] | — | 0-based |
| OSC1 PUL Width | 58 | [0–127] | — | 0-based |
| OSC2 Freq | 59 | [0–127] | — | 0-based |
| OSC2 TRI ON | 60 | [0–127] | — | 0-based |
| OSC2 SAW ON | 61 | [0–127] | — | 0-based |
| OSC2 PUL ON | 62 | [0–127] | — | 0-based |
| OSC2 PUL Width | 63 | [0–127] | — | 0-based |
| LFO1 Rate | 70 | [0–127] | — | 0-based |
| LFO1 Depth | 71 | [0–127] | — | 0-based |
| LFO2 Rate | 72 | [0–127] | — | 0-based |
| LFO2 Depth | 73 | [0–127] | — | 0-based |
| ENV3 Amnt | 84 | [0–127] | — | 0-based |
| ENV3 Attack | 85 | [0–127] | — | 0-based |
| ENV3 Decay | 86 | [0–127] | — | 0-based |
| ENV3 Sustain | 87 | [0–127] | — | 0-based |
| ENV3 Release | 88 | [0–127] | — | 0-based |
| MIX1 | 102 | [0–127] | — | 0-based |
| MIX2 | 103 | [0–127] | — | 0-based |
| MIX Noise | 104 | [0–127] | — | 0-based |
| VCF Freq | 105 | [0–127] | — | 0-based |
| VCF RES | 106 | [0–127] | — | 0-based |
| ENV1 Amnt | 107 | [0–127] | — | 0-based |
| ENV1 Attack | 108 | [0–127] | — | 0-based |
| ENV1 Decay | 109 | [0–127] | — | 0-based |
| ENV1 Sustain | 110 | [0–127] | — | 0-based |
| ENV1 Release | 111 | [0–127] | — | 0-based |
| ENV2 Attack | 114 | [0–127] | — | 0-based |
| ENV2 Decay | 115 | [0–127] | — | 0-based |
| ENV2 Sustain | 116 | [0–127] | — | 0-based |
| ENV2 Release | 117 | [0–127] | — | 0-based |
| 303 Accent Macro | 119 | [0–127] | — | 0-based |
The portions of this library that refer to specific devices may be owned by the devices' respective manufacturers. Everything else is licensed under the Creative Commons Attribution Share Alike 4.0 International license.