VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated on 2026-04-08 by https://midi.guide , the open,
# 'comprehensive' dataset of all MIDI CCs and NRPNs.
# Contributions welcome!

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Digitone

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
102 Amp env reset
107 Release time
106 Sustain level
105 Decay time
104 Attack time
73 Lowpass filter
72 Highpass filter
20 Mix volume
70 Attack time
71 Decay time
74 Filter type
43 Env delay
73 Release time
72 Sustain level
90 Algorithm
91 Ratio C
92 Ratio A
81 B env end
80 B env decay
82 B level
83 A delay
84 A trig
85 A env reset
86 B delay
87 B trig
88 B env reset
89 Phase reset
75 A env attack
76 A env decay
77 A env end
78 A level
79 B env attack
14 Mix volume
70 High-pass
71 Width
113 Trig mode LFO 1
114 Multiplier LFO 2
119 Trig mode LFO 2
118 Start phase LFO 2
117 Waveform LFO 2
116 Destination LFO 2
115 Fade in out LFO 2
111 Waveform LFO 1
110 Destination LFO 1
109 Fade in out LFO 1
108 Multiplier LFO 1
112 Start phase LFO 1
79 Pan R
83 Dual mono
78 Pan L
95 Pattern volume
73 CC val 4
74 CC val 5
76 CC val 7
75 CC val 6
77 CC val 8
70 CC val 1
71 CC val 2
72 CC val 3
64 Sustain
66 Sostenuto
75 Shelving freq
76 Highpass filter
77 Lowpass filter
23 Mix volume
74 Decay time
95 Track level
94 Mute
16 Portamento on
15 Protamento time
13 Filter trig
5 Length
4 Velocity
3 Root
14 LFO trig

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]
10:42 Pan
13:45 Delay send
14:46 Reverb send
9:41 Drive
7:39 Volume
12:44 Chorus send
19:51 Reverb send
18:50 Feedback
17:49 Stereo width
16:48 Pingpong
15:47 Delay time
23:55 Filter frequency
25:57 Env depth
26:58 Base
24:56 Resonance
27:59 Width
16:48 Ratio B
17:49 Harmonics
18:50 Detune
19:51 Feedback
20:52 Mix
12:44 Delay send
13:45 Reverb send
3:35 Depth
9:41 Speed
29:61 Depth LFO 1
30:62 Speed LFO 2
31:63 Depth LFO 2
28:60 Speed LFO 1
29:61 Pattern volume
26:58 Chorus send L
30:62 Chorus send R
27:59 Delay send L
31:63 Delay send R
28:60 Reverb send L
82:32 Reverb send R
26:58 Chorus send L R
27:59 Delay send L R
28:60 Reverb send L R
29:61 Master overdrive
24:56 Input L volume
25:57 Input R volume
21:53 Predelay
22:54 Shelving gain

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
1:37:14 Pan
1:40:14 Delay send
1:39:14 Reverb send
1:42:14 Amp env reset
1:36:14 Drive
1:35:14 Release time
1:34:14 Sustain level
1:33:14 Decay time
1:32:14 Attack time
1:38:14 Volume
1:41:14 Chorus send
2:16:14 Reverb send
2:15:14 Lowpass filter
2:14:14 Highpass filter
2:13:14 Feedback
2:12:14 Stereo width
2:11:14 Pingpong
2:10:14 Delay time
2:17:14 Mix volume
1:16:14 Attack time
1:17:14 Decay time
1:22:14 Filter type
1:20:14 Filter frequency
1:23:14 Env depth
1:66:14 Env delay
1:24:14 Base
1:19:14 Release time
1:18:14 Sustain level
1:21:14 Resonance
1:25:14 Width
1:75:14 Ratio B
1:76:14 Harmonics
1:72:14 Algorithm
1:77:14 Detune
1:78:14 Feedback
1:79:14 Mix
1:95:14 Ratio C offset
1:96:14 Ratio A offset
1:97:14 Ratio B1 offset
1:98:14 Ratio B2 offset
1:73:14 Ratio C
1:74:14 Ratio A
1:86:14 B env end
1:85:14 B env decay
1:87:14 B level
1:88:14 A delay
1:89:14 A trig
1:90:14 A env reset
1:91:14 B delay
1:92:14 B trig
1:93:14 B env reset
1:94:14 Phase reset
1:80:14 A env attack
1:81:14 A env decay
1:82:14 A env end
1:83:14 A level
1:84:14 B env attack
2:4:14 Delay send
2:5:14 Reverb send
2:6:14 Mix volume
2:0:7 Depth
2:1:14 Speed
2:2:14 High-pass
2:3:14 Width
1:54:14 Trig mode LFO 1
1:55:14 Depth LFO 1
1:57:14 Speed LFO 2
1:58:14 Multiplier LFO 2
1:64:14 Depth LFO 2
1:63:14 Trig mode LFO 2
1:62:14 Start phase LFO 2
1:61:14 Waveform LFO 2
1:60:14 Destination LFO 2
1:59:14 Fade in out LFO 2
1:52:14 Waveform LFO 1
1:51:14 Destination LFO 1
1:50:14 Fade in out LFO 1
1:49:14 Multiplier LFO 1
1:48:14 Speed LFO 1
1:53:14 Start phase LFO 1
2:37:14 Pattern volume
2:33:14 Pan R
2:34:14 Chorus send L
2:102:14 Chorus send R
2:35:14 Delay send L
2:103:14 Delay send R
2:36:14 Reverb send L
2:104:14 Reverb send R
2:34:14 Chorus send L R
2:35:14 Delay send L R
2:36:14 Reverb send L R
2:37:14 Master overdrive
2:105:14 Dual mono
2:30:14 Input L volume
2:32:14 Input R volume
2:31:14 Pan L
2:38:14 Pattern volume
1:104:14 Pattern mute
2:20:14 Predelay
2:22:14 Shelving freq
2:23:14 Shelving gain
2:24:14 Highpass filter
2:25:14 Lowpass filter
2:26:14 Mix volume
2:21:14 Decay time
1:100:14 Track level
1:101:14 Mute
3:8:14 Portamento on
3:7:14 Protamento time
3:5:14 Filter trig
3:2:14 Length
3:1:14 Velocity
3:0:7 Root
3:6:14 LFO trig

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]