VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated on 2025-12-09 by https://midi.guide , the open,
# 'comprehensive' dataset of all MIDI CCs and NRPNs.
# Contributions welcome!

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Micromonsta 2

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
29 Reverb decay
30 Reverb mod
31 Reverb level
26 Delay time
27 Delay feedback
28 Delay level
72 Env 1 release
80 Env 2 attack
81 Env 2 decay
82 Env 2 sustain
83 Env 2 release
85 Env 3 decay
84 Env 3 attack
86 Env 3 sustain
87 Env 3 release
73 Env 1 attack
75 Env 1 decay
79 Env 1 sustain
71 Filter resonance
89 Filter tracking
90 Filter FM
74 Filter cutoff
88 Filter envelope
34 Osc detune
7 Volume
1 Mod wheel
62 Lag level 1
32 Bank select LSB
70 Mod knob
64 Sustain pedal
37 Filter env velocity sensitivity
123 All notes off
36 VCA env velocity sensitivity
120 All sound off
35 Pan spread
25 EQ
77 LFO 2 speed
76 LFO 1 speed
78 LFO 3 speed
49 Osc 2 level
50 Osc 3 level
48 Osc 1 level
51 Noise level
57 Mod matrix level 6
58 Mod matrix level 7
59 Mod matrix level 8
60 Mod matrix level 9
61 Mod matrix level 10
52 Mod matrix level 1
53 Mod matrix level 2
54 Mod matrix level 3
55 Mod matrix level 4
56 Mod matrix level 5
40 Osc 1 tune
43 Osc 2 tune
42 Osc 2 shape
41 Osc 1 fine tune
39 Osc 1 shape
47 Osc 3 fine tune
46 Osc 3 tune
45 Osc 3 shape
44 Osc 2 fine tune
91 Voice drive
33 Voice detune
5 Voice glide

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]